Independent research on labels and everyday essentials. We don't earn from the links on this site. How we work
HNNHOME

HNNHOME Shower Drain Cover Replacement, Chrome Shower Trap Cover, Removable Top Fitting Cap

Overview

The HNNHOME shower drain cover is a replacement top fitting for a shower trap, with a chrome cover, a white dip cup and an integrated hair catcher. The listing says it fits shower trays with a 90mm waste exit, a common UK size. It suits anyone replacing a lost, cracked or worn cover rather than the whole waste. The figures that matter most are the 90mm waste size and the part's own measurements: 115mm long, 115mm wide and 86mm high.

At a glance
Fits
Shower trays with a 90mm waste exit (brand)
Size
115mm long, 115mm wide, 86mm high (brand)
Finish
Chrome cover with white dip cup (brand)
Hair catcher
Integrated hair catcher and waste trap (brand)
Fitting
Quick to fit, no expert needed (brand)

What size shower drain cover do I need?

Start with the waste under your tray. The listing says this cover fits shower trays with a 90mm waste exit, which it describes as common in the UK. It names no other waste size, and gives the cover's own size as 115mm long and 115mm wide.

The part is 86mm high overall, so check the depth of your trap body as well as the width of the opening before you order. Other fittings and accessories are on our bathroom shelf.

How does the hair catcher work?

The listing says the integrated hair catcher and waste trap stop hair and debris before they cause a jam, keeping the drain running smoothly. The cover and dip cup come apart for cleaning.

Lift the cover, empty the hair catcher and rinse the dip cup regularly, because the catcher only works while it has room to collect. Warm soapy water and a soft brush avoid scratching the chrome finish.

How do you fit a replacement shower trap cover?

The listing says installation is quick and easy and needs no expert help. Before you remove the old cover, check how it is held in place, whether it lifts out or unscrews.

If your trap has a different body or a screw-in centre, a cover made for another trap may not sit properly. Photograph the old part and its markings so you can compare it with this one. After fitting, run the shower briefly and check that the cover sits flat and the tray drains freely.

Who is this drain cover for?

It suits anyone with a 90mm shower waste whose cover is missing, cracked or worn, and who wants a chrome look. The listing says the design keeps a good flow rate, so water drains from the tray without standing. It is a cover and hair trap only, so it will not fix a leaking waste seal or a blockage further down the pipe.

If you are updating the rest of the shower area, our page on the Munchkin Dandy Dots non-slip mat explains where suction mats grip and where they do not.

Where to buy

Plain links to UK retailers that list this exact product. We don't earn anything from them, and prices change, so check before you buy.

Frequently asked questions

What size is the HNNHOME shower drain cover?

It measures 115mm long, 115mm wide and 86mm high, according to the listing, and fits trays with a 90mm waste exit.

Will the HNNHOME cover fit my shower tray?

It should if your tray has a 90mm waste exit. Measure the opening and the trap depth first, because the listing names no other waste size.

Does the drain cover catch hair?

Yes. The listing says it has an integrated hair catcher and waste trap to stop hair and debris causing jams.

Do I need a plumber to fit it?

No, according to the listing, which says no expert help is needed. It replaces the top cover, not the waste itself.

More in Bathroom

See all →

Short on time? Our best bathroom shortlist narrows this shelf down to a handful.