How Often Should You Change a Razor Blade?
Part of our guide: Razor Blades: The Real Cost Over a Year
By the BasketLab team · updated 28 October 2026 · how we work
Nobody enjoys changing a razor blade. They're fiddly, they cost a small fortune, and there's a stubborn little voice insisting this one's got a couple more shaves left in it. It hasn't. A dull blade is why your shave tugs, why your neck's covered in angry red bumps, and why you've quietly started dreading the whole business.
Change a cartridge after 5 to 10 shaves and a double-edge safety blade after 3 to 7, adjusting for how coarse your beard is and how much area you shave. Go by feel rather than counting: tugging, dragging or irritation means the blade is done. Pushing a dull blade further causes razor burn and ingrown hairs, and saves almost nothing.
How many shaves you should get
| Blade type | Typical shaves | Shorter if… |
|---|---|---|
| Cartridge (3 to 5 blades) | 5 to 10 | Coarse or dense beard, shaving head or body |
| Double-edge safety blade | 3 to 7 | Daily shaving, thick growth |
| Disposable razor | 3 to 5 | Any large area |
| Electric foil / head | Replace every 12 to 18 months | Daily use |
These are ranges, not rules, because beard coarseness varies enormously and shaving a head or legs blunts a blade several times faster than shaving a face. Frequency of shaving matters less than total area and hair thickness.
The signs that actually tell you
Counting shaves is a rough guide. Your skin gives better information, and these are the signals worth acting on.
- Tugging or dragging instead of gliding: the clearest sign, and the one to act on immediately.
- Needing more passes over the same patch to get it smooth.
- Irritation, burn or bumps appearing after a shave that used to be comfortable.
- Visible rust or mineral deposits between the blades.
- Nicks becoming common when your technique has not changed.
Why a dull blade is worse than a wasted one
A blunt blade does not cut cleanly, so it pulls the hair before severing it and scrapes the skin surface instead of gliding over it. That is the mechanism behind razor burn, ingrown hairs and post-shave bumps, and it is why people who stretch blades often blame their skin rather than their kit.
The money involved is small. Even on branded cartridges, one extra change a month costs a few pounds a year. Weighed against a week of irritated skin, changing early is the cheaper decision.
How to make blades last longer, properly
Blades blunt from corrosion at least as much as from cutting, so how you store them matters more than most people expect.
- Rinse thoroughly and shake dry after every shave; do not wipe the edge on a towel, which rolls it.
- Store the razor somewhere dry, out of the shower stream. A wet shelf is the fastest way to blunt a blade.
- Shave after a warm shower so hair is softened; dry, coarse hair is far harder on the edge.
- Use light pressure. Pressing harder does not shave closer, it just wears the blade and irritates skin.
- Rinse the blade during the shave rather than tapping it against the sink, which damages the edge.
What this means for cost
If you shave most days, a cartridge lasting seven shaves means roughly four cartridges a month. On branded refills that is where the high yearly figure in our razor cost guide comes from, and it is why the choice of razor system matters far more than squeezing an extra shave out of each blade.
A safety razor changes the maths entirely: blades cost pennies, so changing every three shaves is still only a few pounds a year. When the blade is cheap, there is no reason to endure a dull one.
Common questions
How often should you change a razor blade?
A cartridge typically lasts 5 to 10 shaves and a double-edge safety blade 3 to 7, but go by feel rather than counting. Tugging, dragging, extra passes or irritation mean the blade is done, whatever the number of shaves.
How do you know when a razor blade is blunt?
It tugs instead of gliding, you need more passes over the same area, you get irritation or bumps after a shave that used to be comfortable, or you can see rust or deposits between the blades.
What happens if you use a razor blade too long?
A dull blade pulls hair before cutting it and scrapes the skin, which causes razor burn, ingrown hairs and bumps. It also raises the risk of nicks, since you press harder to compensate. The saving is a few pounds a year at most.
How do I make razor blades last longer?
Rinse and shake dry after every shave rather than wiping the edge, store the razor somewhere dry away from the shower, shave after a warm shower so hair is softened, and use light pressure. Corrosion blunts blades as much as cutting does.
How often should I replace an electric shaver head?
Foils and cutter heads generally need replacing every 12 to 18 months with daily use. Performance drops gradually, so if shaving takes longer or feels less close than it used to, the head is usually the reason.